Israel is currently executing one of the world's most aggressive transportation decarbonization strategies. Spearheaded by the Israel Ministry of Energy, the state has mandated that by 2030, 100% of all newly registered light vehicles, municipal transit buses, and last-mile commercial delivery fleets must be Zero-Emission Vehicles (ZEVs). However, building out a reliable charging ecosystem across Israel presents unique technical, regulatory, and environmental challenges. From the intense ambient thermal pressures of the Negev Desert to the dense, high-frequency urban arteries of Gush Dan (Tel Aviv metro area), EV hardware must meet stringent standards for resilience, connectivity, and electrical grid safety.
As a specialized OEM/ODM manufacturing facility supplying electric vehicle chargers, high-voltage electric motorcycles, commercial fleet telematics, and prismatic NMC battery storage systems, our factory delivers end-to-end hardware built to withstand local grid parameters. By integrating CCS2 (IEC 62196-3) DC fast-charging standards, Open Charge Point Protocol (OCPP 1.6J / 2.0.1), and robust 50Hz grid stabilization circuits, our products empower Israeli importers, Charge Point Operators (CPOs), and logistics enterprises to deploy future-proof EV infrastructure seamlessly certified by the Standards Institution of Israel (SII).
Information Gain Insight: Unlike standard off-the-shelf EV hardware, factory-customized equipment for the Israeli market requires specialized active cooling loops, IP65/IK10 enclosure ratings, ISO 15118 Plug & Charge readiness, and seamless Modbus/4G LTE telematics integration to prevent heat-induced thermal throttling during peak Mediterranean summer months.
Utilizing car-grade HV platforms instead of conventional low-voltage setups. Reduces line current by up to 60%, drastically minimizing heat build-up under extreme operational heat.
Full compliance with European & Israeli standards. Ensures seamless interoperability across public fast-charging stations operated by EV-Edge, Sonol EVI, and Afcon.
Embedded 4G LTE data loggers with Modbus RTU/TCP protocols allow real-time diagnostic reporting, OTA firmware updates, and predictive maintenance for commercial fleets.
Factory-level customization is imperative when exporting EV supply equipment (EVSE) and electric commercial vehicles to Israel. The country's electricity distribution network operates at 230V single-phase / 400V three-phase at a strict 50Hz frequency. Furthermore, public charging stations must interface with CPO central management systems via OCPP 1.6 JSON or OCPP 2.0.1 with TLS 1.3 encryption.
Ambient temperatures in southern regions like Eilat and the Dead Sea basin frequently exceed 45°C in summer. Standard EV lithium-ion packs experience rapid degradation and severe charging power derating under these conditions. Our factory utilizes high-stability NMC 811 Prismatic Cells paired with advanced liquid-cooling thermal management systems (TMS). This maintains cell temperatures below 35°C during 150kW+ DC fast charging, preserving battery state of health (SOH) across 3,500+ deep charge cycles.
Commercial parks in Haifa and logistics centers around Highway 6 often face local grid transformer capacity constraints. Our AC charging columns (7kW to 22kW) and DC fast chargers incorporate built-in DLM logic. This enables automated load balancing across 30+ charging points simultaneously without overloading localized substation transformers, optimizing energy tariff usage during off-peak night hours.
How our factory's integrated product lineup solves operational hurdles across Israel's specific geography and economic hubs.
Narrow urban thoroughfares and heavy traffic congestion in Tel Aviv demand agile, zero-emission commercial transport. Our EEC-certified 2-wheel delivery electric motorcycles coupled with 4G LTE Telematics (UM778) allow logistics providers to navigate pedestrianized zones rapidly. Operators monitor real-time tire pressure (TPMS), battery state of charge (SOC), and two-way voice dispatching, reducing per-package delivery costs by up to 72% compared to internal combustion engine (ICE) scooters.
Long-haul fleet electrification requires robust fast-charging compatibility. Our High-Voltage Electric Motorcycles and DC Fast Chargers utilize standard CCS2 inlets, enabling vehicles to top up 20% to 80% charge in approximately 36 minutes at public charging plazas along Highway 6. This eliminates range anxiety while maintaining continuous multi-shift fleet dispatch schedules.
Many Israeli kibbutzim are adopting localized solar PV power plants paired with battery energy storage systems (BESS). Our Modbus 4G Telematics Recorders and Starmax NMC Prismatic Cells integrate directly into microgrid controllers, storing daytime solar generation and releasing power to 22kW Type 2 public charging stations during peak demand periods.
To support the massive existing fleet of hybrid passenger vehicles operating in Israel, our factory provides direct wholesale access to high-capacity 7.2V 6500mAh Hybrid Replacement Battery Packs (compatible with CT200H, RX450H, RX400H). Covered by a 36-month factory warranty, these packs offer Israeli auto service centers a cost-effective OEM replacement solution.
Direct-from-factory quality control, localized product compliance, and scaled wholesale manufacturing capacity.
All charging hardware and electrical components are pre-tested to pass European IEC 61851, IEC 62196, CE, RoHS, and local Israel Standards Institution (SII) safety filings.
Custom enclosure colors, laser-engraved Hebrew/English logos, custom UI/UX screens for 7-inch TFT displays, and pre-configured CPO server domain endpoints.
Streamlined logistics from our automated manufacturing lines straight to Haifa Port or Ashdod Port, accompanied by complete technical dossiers for seamless customs clearance.
Connect directly with our factory engineering team to request customized technical specifications, wholesale price lists, and sample testing units for your business.